Shane Rabourn's 620HP GTO

The good
I bought this car new off the showroom floor in October 2004
Never drove in snow/ never seen salt
Meticulously maintained and cared for and mostly documented on LS1GTO.
All of the above mods to the car were done and installed by me with the exception of the motor build, transmission build, rear end build and exhaust. Heads and intake were installed by me.
Interior in great shape
Under-hood is amazing
Under-car is amazing


Kooks 1 ¾" headers
Kooks cattless midpipes modified to 3" all the way through
Custom (417motorsports) single 4" polished SS exhaust. Vibrant resonator and borla oval with corsa oval tip (sounds amazing).
Stock MLS header gaskets

Motor (installed at 40,000 miles in 2009)


"Forged 347" built by eagle machine. Balanced rotating assembly. Stock crank.
Mahle pistons
Callies/ Compstar rods
Ported and shimmed LS6 oil pump
Timing Chain (don't remember brand)
ARP rod bolts
Cam- 229/234, .600/.612, 111 + 4 LSA (cam was degreed in and installed at a 107 centerline)
ARP head studs
Sakimichi dual catch can
Functional pcv system w/ 1 way pressure relief valve
Underdrive Pulley
NGK BR7 plugs
Taylor 100MM wires
Noltec poly motor mounts
Trick flow as cast 220's hand ported by Brian Tooley (powdered metal guides) (installed 2012)
GM MLS head gaskets
LS7 rockers with trunion upgrade
Fast 92/ 92 combo port matched by Brian Tooley
Svede OTRCAI 2x2 Carbon Weave (1 of 1)
SD tune
Billet tensioner
Nasty N8 fuel rails

Lingenfelter/ walbro 255 fuel pump kit
Ford 42lb green top injectors



Texas Drivetrane Performance built transmission (installed at 52,000 miles)
Monster level 3 clutch
Remote clutch bleeder located by master cylinder
GMM Ripshift street w/ LSS installed w/ cobra bob shifter gasket
DSS carbon fiber 1 pc drive shaft
DSS stubs
DSS axles
OEM 3.91's cryotreated
Rear built by TBO (installed 2014)



Wilwood drilled and slotted 14" front 12.19 rear (installed 2014)
SS lines
Line Lock

Wheels/ Tires


VMR V710 custom powdercoated
Custom made center caps
235 40 18 RE71R (700 miles on them)
265 35 18 RE71R (700 miles on them)
Project KICS 2 pc lugnuts with locking nut


BC coilovers (installed 2014)
Superpro strut top bushings
Superpro front and rear radius rod bushings
Full energy suspension bushing kit: Front and rear sway bar, inner and outer rear control arms, rear subframe, rear diff. (front control arm and end link bushings not installed)
Noltec camber kit installed at outer position
Rear toe rods
ARP extended wheel studs


05/06 hood w/ shaved grills
OEM Sap grills painted PBM
OEM VX Tails tinted by Jorge
Spoiler delete
Goldilocks 2.0 (some pics show the OG goldilocks this one is no longer on the car the 2.0 is!)
Tinted side marker lights
5% tint on sides and back, 35% on entire windshield
JBiz front and rear polished arrowheads
JBiz side markers
Full JBiz cap set under hood with (1 of 1) coolant cap and (1 of 2) brake cap
ARP 12 pt polished nuts/ bolts everywhere under hood and a few under the car
Whole car wetsanded

Weight Reduction

BMR light weight skid plate
Fuel tank brace delete
Tow hitch mount delete w/ TBO kit to retain rear plastic


2006 OEM gauge face overlay
Aem Uego wideband
Aeroforce scangauge
Gatorpod (looks OEM)
Custom faces for the gauges to look OEM
Holden sport steering wheel (installed 2015)
New oem shift knob and boot (installed 2015)
JBiz carpet clips


Nitrous outlet 92MM plate
Nitrous outlet fuel, nitrous and purge solenoid
Nitrous outlet heated bottle bracket
Nitrous outlet 15 lb bottle
Nitrous outlet nitrous filter
Nitrous outlet switch panel
NX remote opener




Dynotune nitrous pressure gauge
HSW Microedge controller
Leash relay box for bottle heater
Leash nitrous controller with 2step disarm
Leash fuse panel
Schematic for all electronics added in car with color code!



Pioneer AVIC X710BT
Team SCSS install kit (looks OEM)
Steering wheel interface
Infinity Kappa component set


Tuned by me since 2009
LPE 2 step w/ no lift shift
OEM Shift light activated
Rev limiter set at 7400
Daytime running lights disabled
Optima red top
Car cover
Service manuals




Contact Shane Rabourn at (417) 838-3875 if interested

Car made 440/410 in mid July 2014.
Car made 620/625 same day on a 200 shot running rich.
The trap speeds tell the story of what this car is capable of. Dyno numbers mean nothing.

Car has ran a best of 10.99 and trapped a best of 135 on a 163 shot
Car has ran a best of 11.7 and trapped 122 on motor

This car has drove to the track, made 10+ runs at a time and drove home under its own power without problem time and time again. The car has only been on a trailer 3 times since I bought new in 2004.

I can answer text messages most of the time and text is the preferred method of contact.

If you're out of state I can pick you up at the airport. I can also help arrange shipping. I would consider taking some parts off of the car and selling it for less as well but I would need some cash upfront before pulling anything off of it.